Jump to content
NAKIVO Introduces Agent-Based Data Protection for Proxmox VE ×
NAKIVO Community Forum

nakivo 10.7.2 and synology dsm 7


perrcla

Recommended Posts

8 hours ago, perrcla said:

Hi,

how can i install nakivo 10.7.2 in synology dsm 7?

 

thank you

 
Hello, @perrcla Thank you for getting back to us. 
 
1. Install the NBR version 10.7.1 via Synology AppCenter.
 
2. Stop NAKIVO services: Package center -- Installed -- NAKIVO -- Action -- Stop.
 
3. Connect to Synology via SSH (Putty) using an admin account.
 
4. Get root privileges running the following command:
 
sudo -i
 
Enter your admin password when prompted.
 
5. Go to /root folder:
 
cd /root
 
5. Download the newest NBR version installation script for Synology NAS, for example for x86_x64 platform:
 
 
 
7. Run the following commands to replace the existing NBR director with the newest version:
 
chmod +x updater.sh
 
./updater.sh
 
8. Start NAKIVO services if needed: Package center -- Installed -- NAKIVO -- Action -- Start.
 
Thank you so much for your attention and participation.
 
We are looking forward to hearing from you.
  • Like 1
Link to comment
Share on other sites

Could I suggest you include these instructions for manual download and installation on DSM 7 for the current and future versions on the main Updates page (with suitable caveats/warnings). The Synology approval process is clear far too slow (it can take months for an update to appear, and even then it tends to lag behind the current version), so I suspect most of us using Nakivo on synology are now updating manually (and how to do so is becoming a FAQ).

Matthew

  • Like 2
Link to comment
Share on other sites

On 1/4/2023 at 7:29 PM, Official Moderator said:
 
Hello, @perrcla Thank you for getting back to us. 
 
1. Install the NBR version 10.7.1 via Synology AppCenter.
 
2. Stop NAKIVO services: Package center -- Installed -- NAKIVO -- Action -- Stop.
 
3. Connect to Synology via SSH (Putty) using an admin account.
 
4. Get root privileges running the following command:
 
sudo -i
 
Enter your admin password when prompted.
 
5. Go to /root folder:
 
cd /root
 
5. Download the newest NBR version installation script for Synology NAS, for example for x86_x64 platform:
 
 
 
7. Run the following commands to replace the existing NBR director with the newest version:
 
chmod +x updater.sh
 
./updater.sh
 
8. Start NAKIVO services if needed: Package center -- Installed -- NAKIVO -- Action -- Start.
 
Thank you so much for your attention and participation.
 
We are looking forward to hearing from you.

Solved!

It works! Thanks 

  • Like 1
Link to comment
Share on other sites

On 1/7/2023 at 12:19 PM, mdovey said:

Could I suggest you include these instructions for manual download and installation on DSM 7 for the current and future versions on the main Updates page (with suitable caveats/warnings). The Synology approval process is clear far too slow (it can take months for an update to appear, and even then it tends to lag behind the current version), so I suspect most of us using Nakivo on synology are now updating manually (and how to do so is becoming a FAQ).

Matthew

@mdovey Thank you for raising your question on the NAKIVO Forum. It has been escalated to the Product Team. I'll get back with the response as soon as they update me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...